Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-112001.png)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
SPEED SENSOR FRONT LH
REPLACEMENT
HINT: Replace the RH side by the same procedures with LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor connector.
b. Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.
c. Remove the bolt and speed sensor FR LH.
NOTICE: Do not stick and foreign matter on the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor FR LH with the bolt.
