Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-947002.png)
d. Install the lower suspension arm with the bolt and nut to the rear side.
Torque: 206 Nm (2,100 kgf-cm, 152 ft. lbs.)
5. INSTALL ENGINE MOUNTING INSULATOR
a. Install the engine mounting insulator with the 3 nuts.
Torque: 87 Nm (890 kgf-cm, 64 ft. lbs.)
6. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
