Highlander 2WD V6-3.0L (1MZ-FE) (2003)
c. Using SST, compress the coil spring.
SST 09727-30021
NOTICE: Do not use an impact wrench. It will damage the SST
HINT: Use 2 of the same type of SST
d. Install the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the spring lower seat.
e. Install the upper insulator as shown in the illustration.
f.
Install the spring upper seat to the shock absorber with the mark facing to the outside of the vehicle.
g. Install a new ball bearing.