toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Shift Solenoid, A/T > < Engine Controls - ECU Reprogramming Procedure|Page 2839

Highlander 2WD V6-3.0L (1MZ-FE) (2003)

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Shift Interlock Solenoid
  • Component Information
  • Testing and Inspection

Page 1
background image

Shift Interlock Solenoid: Testing and Inspection

INSPECTION 

1. INSPECT KEY INTERLOCK SOLENOID

a. Disconnect the solenoid connector.
b. Connect KLS+ (4) terminal to the batteries positive (+) terminal, and KLS- (3) terminal to the battery negative (-) terminal, and apply about 

12V between KLS+ - KLS- terminals.

c. Check that operation noise can be heard from the solenoid.

If the solenoid does not operate, replace the solenoid.

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Shift Interlock Solenoid
  • Component Information
  • Testing and Inspection

Shift Solenoid, A/T > < Engine Controls - ECU Reprogramming Procedure|Page 2839