Highlander 2WD V6-3.0L (1MZ-FE) (2003)
15. REMOVE PATTERN SELECT SWITCH ASSY NO.1
a. Using a screwdriver, release the 4 claws and remove the pattern select switch assy No. 1 from the position indicator housing lower.
16. REMOVE POSITION INDICATOR SLIDE COVER
a. Remove the position indicator slide cover from the position indicator housing lower.
17. REMOVE FLOOR SHIFT SHIFT LEVER HOUSING SUB-ASSY
a. Remove the 4 bolts and nut, detach the shift lever housing from the shift lever plate.
18. REMOVE SHIFT LOCK CONTROL UNIT ASSY
a. Remove the 2 screws and the shift lock control unit assy from the shift lever plate.
19. REMOVE SHIFT LEVER KNOB SLEEVE
a. Remove the shift lever knob sleeve from the shift lever.