Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-663005.png)
20. INSTALL SHIFT LEVER KNOB SLEEVE
a. Apply MP grease to the shown part of the shift lever knob sleeve and install it to the shift lever.
21. INSTALL SHIFT LOCK CONTROL UNIT ASSY
a. Install the shift lock control unit assy to the shift lever plate with 2 screws.
22. INSTALL FLOOR SHIFT SHIFT LEVER HOUSING SUB-ASSY
a. Install the shift lever housing to the shift lever plate with 4 bolts and nut.
Torque: 5.7 Nm (58 kgf-cm, 50 inch lbs.)
23. INSTALL POSITION INDICATOR SLIDE COVER
a. Install the position indicator slide cover to the position indicator housing lower.
