Highlander 2WD V6-3.0L (1MZ-FE) (2003)
a. Remove the 3 bolts and oil strainer.
NOTICE: Be careful as some fluid will come out with the oil strainer.
b. Remove the O-ring from the oil strainer.
6. REMOVE TRANSMISSION VALVE BODY ASSY
a. Support the valve body assy and remove the 17 bolts and the valve body assy.
NOTICE: Be careful not to drop the check valve body, spring and accumulator piston.
b. Remove the check ball body and spring.
c. Remove the 5 bolts and 5 shift solenoid valves.
7. INSTALL TRANSMISSION VALVE BODY ASSY