Highlander 2WD V6-3.0L (1MZ-FE) (2003)
a. Install the 2 magnets in the oil pan.
b. Apply seal packing or equivalent to 18 bolts.
Seal packing: THREE BOND 2430 or equivalent
c. Install a new gasket, oil pan and 18 bolts to the transaxle case.
Torque: 7.6 Nm (77 kgf-cm, 67 inch lbs.)
NOTICE: Because the bolts should be seal bolts, apply seal packing to bolts and tighten them within 10 minutes after application.
9. ADD AUTOMATIC TRANSAXLE FLUID
10. INSPECT AUTOMATIC TRANSAXLE FLUID