Highlander 2WD V6-3.0L (1MZ-FE) (2003)
SST 09726-10011 (09726-00031)
19. REMOVE FRONT AXLE INBOARD JOINT COVER LH
a. Mount inboard joint shaft in a soft vise.
b. Using a screwdriver, remove the cover.
20. REMOVE FRONT DRIVE SHAFT DUST COVER
a. Using a screwdriver, pry off the dust cover until the SST can be installed.
b. Using SST and a press, remove the dust cover.
SST 09950-00020
21. REMOVE FRONT DRIVE SHAFT BEARING
a. Using a snap ring expander, remove the snap ring.
b. Using SST and a press, remove the bearing from the inboard joint.
SST 09527-21011