Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-1394002.png)
b. Automatic Stop Position Operation Check
1. Connect the positive (+) lead from the battery to terminal 3 (+B) and the negative (-) lead to terminal 1 (LS).
NOTE: The body earth should be connected.
2. With the motor being rotated, disconnect terminal 3 (+B) and terminal 1 (LS) to stop the motor operation at any position except the automatic
stop position.
3. Connect the positive (+) lead from the battery to terminal 3 (+B), check that the motor is restarted and automatically stopped.
