Highlander 2WD V6-3.0L (1MZ-FE) (2003)
a. Disengage the meshing of 2 rods at the clank arm pivot of the windshield wiper motor assembly.
b. Using a torx socket wrench, remove the 2 bolts to remove the windshield wiper motor assembly.
8. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
a. Apply MP grease to the clank arm pivot of the windshield wiper motor assembly.
b. Using a torx socket wrench, install the windshield wiper motor assembly with the 2 bolts to the windshield wiper link assembly.
Torque: 5.39 N.m (55 kgf.cm, 48 in.lbf)
9. INSTALL WINDSHIELD WIPER LINK ASSEMBLY
a. Engine the meshing of the rubber pin.
b. Install the windshield wiper link assembly with the 2 bolts.
Torque: 7.0 N.m (71 kgf.cm, 61 in.lbf)
c. Connect the connector.
10. INSTALL FR WIPER ARM LH