Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-1395003.png)
a. Clean the wiper pivot serration with the with brush.
b. Fix the front wiper arm driver side with a nut in the way that the front wiper blade on the position shown in the illustration.
Torque: 24 N.m (240 kgf.cm, 17 ft.lbf)
11. INSTALL FR WIPER ARM RH
a. Clean the wiper pivot serration with the with brush.
b. Fix the front wiper arm passenger side with a nut in the way that the front wiper blade on the position shown in the illustration.
Torque: 24 N.m (240 kgf.cm, 17 ft.lbf)
c. Operate the wiper while running the water or the washer fluid over the window, and check the wiping condition and that the wiper does not hit
against the vehicle body.
