Highlander 2WD V6-3.3L (3MZ-FE) (2004)
a. Using a screwdriver, disengage the 3 clips and remove the 3 claws and rail garnish.
HINT: Tape the screwdriver tip before use.
36. REMOVE ROOF SIDE RAIL GARNISH SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
37. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
a. w/o Rear No. 2 seat:
1. Using a screwdriver, remove the 4 clips and side garnish.
HINT: Tape the screwdriver tip before use.
b. w/ Rear No. 2 seat:
1. Using a screwdriver, remove the 4 clips labeled A, clip labeled B, remove the side garnish.
HINT: Tape the screwdriver tip before use.
38. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH
HINT: Use the same procedures described for the LH side.
39. REMOVE FRONT PILLAR GARNISH LH