Highlander 2WD V6-3.3L (3MZ-FE) (2004)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
SPEED SENSOR FRONT LH
REPLACEMENT
HINT: Replace the RH side by the same procedures with LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSY LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor connector.
b. Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.
c. Remove the bolt and speed sensor FR LH.
NOTICE: Do not stick and foreign matter on the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor FR LH with the bolt.