Highlander 2WD V6-3.3L (3MZ-FE) (2004)
/Page-376002.png)
a. Install the oil pressure gauge.
5. WARM UP ENGINE
6. CHECK OIL PRESSURE
Oil pressure
7. INSTALL OIL PRESSURE SWITCH
a. Remove the oil pressure gauge.
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Install the oil pressure switch.
Torque: 15 Nm (152 kgf-cm,11 ft. lbs.)
d. Connect the oil pressure switch connector.
8. START ENGINE AND CHECK FOR LEAKS
