Highlander 2WD V6-3.3L (3MZ-FE) (2004)
5. REMOVE EXHAUST PIPE ASSY FRONT
(a) Loosen the clamp.
(b) Remove the 2 nuts and pipe.
6. INSTALL EXHAUST PIPE ASSY FRONT
(a) Install 2 new gaskets and the pipe with the 2 nuts.
Torque: 56 Nm (571 kgf.cm, 41 ft.lbf)
(b) Tighten the clamp.
Torque: 21 Nm (214 kgf.cm, 15 ft.lbf)
7. INSTALL EXHAUST PIPE SUB-ASSY FRONT NO.3
(a) Install 2 new gaskets to the pipe front No.3.
(b) Install the front pipe No.3 to the pipe front with the 2 bolts.
Torque: 56 Nm (571 kgf cm, 41 ft.lbf)
(c) Install the front pipe No.3 to the exhaust manifold RH with the 2 nuts.
Torque: 56 Nm (571 kgf cm, 41 ft.lbf)
8. INSTALL EXHAUST PIPE ASSY CENTER
(a) Install the pipe center to the 4 exhaust pipe supports.
(b) Install a new gasket and the pipe center to the front pipe No.3 with the 2 bolts.
Torque: 48 Nm (489 kgf.cm, 35 ft.lbf)