Highlander 2WD V6-3.3L (3MZ-FE) (2004)
Wheel Fastener: Service and Repair
Front Axle LH Hub Bolt Replacement
REPLACEMENT
HINT: Replace the RH side by the same procedures with LH side.
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSY LH
3. REMOVE FRONT DISC
4. REMOVE FRONT AXLE LH HUB BOLT
a. Using SST and a screwdriver or an equivalent to hold, remove the hub bolt.
SST 09628-10011
5. INSTALL FRONT AXLE LH HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a screwdriver to hold, install the hub bolt by torquing the nut.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSY LH
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)