Highlander 2WD V6-3.3L (3MZ-FE) (2004)
POWER OUTLET SOCKET ASSY CTR
REPLACEMENT
HINT:
-
Installation is in the reverse order of removal.
1. REMOVE POWER OUTLET SOCKET ASSY CTR
a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket
cover, and push out the socket to the room side.
2. INSTALL POWER OUTLET SOCKET ASSY CTR
a. Align the socket with the notch on the power point socket cover CTR and install the power socket assy CTR by pushing it in as hard as
possible.
Rear
POWER POINT SOCKET ASSY RR
REPLACEMENT
HINT:
-
Installation is in the reverse order of removal.
1. REMOVE POWER POINT SOCKET ASSY RR
a. Using a screwdriver, disengage the claw on the power point socket cover from the hole in the power point socket, then pull out the power point
socket approx. 10 mm (0.39 in.).
HINT: Tape the screwdriver tip before use.