Highlander 2WD V6-3.3L (3MZ-FE) (2004)
Evaporative Emission Control Canister: Service and Repair
REPLACEMENT
1. REMOVE EXHAUST PIPE ASSY CENTER
a. Remove the 4 bolts and 4 compression springs.
b. Remove the exhaust pipe center from the 4 exhaust pipe supports.
c. Remove the 2 gaskets from the exhaust pipe front No. 3 and the exhaust pipe center.
2. REMOVE FRONT FLOOR HEAT INSULATOR NO.3
a. Remove the 4 bolts and heat insulator.
3. REMOVE CHARCOAL CANISTER ASSY
a. Disconnect the VSV connector for CCV.
b. Disconnect the fuel emission hose.
c. Disconnect the air inlet line hose.