toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABS/TCS - Intermittent VSC Activation|Page 580 > < ABS/TCS - Zero Point Calibration Procedure|Page 575
Page 1
background image

Steering Angle Sensor: All Technical Service Bulletins
ABS/TCS - Intermittent VSC Activation

BRAKES
BR008-04
REVISED

Title:
STEERING ANGLE SENSOR

Models:
'04 Highlander & Sienna

November 30, 2004

TSB REVISION NOTICE:

^

February 23, 2005: The Production Change Information table has been updated. The previous TSB should be discarded.

Introduction

Some customers may experience an intermittent VSC activation after starting the engine and driving straight from a stop position. This condition is
always accompanied by the instrument panel VSC light and audible warning buzzer turning on at the same time. To prevent this condition, the Steering
Angle Sensor has been changed.

Applicable Vehicles

^

2004 model year Highlander and Sienna vehicles produced BEFORE the Production Change Effective VINs shown.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

ABS/TCS - Intermittent VSC Activation|Page 580 > < ABS/TCS - Zero Point Calibration Procedure|Page 575