Highlander 2WD V6-3.3L (3MZ-FE) (2004)
/Page-1061009.png)
SST 09631-10021
(c) Remove the compression spring and the rack guide.
25. REMOVE POWER STEERING CONTROL VALVE
(a) Using a socket wrench (27 mm), remove the rack housing cap.
(b) Using SST, keep the control valve shaft and remove the nut.
SST 09616-00011
(c) Wrap vinyl tape around the spline of the control valve in order to prevent damaging the oil seal.
(d) Remove the dust cover from the control valve housing.
(e) Remove the 2 bolts and the control valve housing with the control valve.
(f) Remove the gasket.
