toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering - Knock/Pop Noise When Turning Steering Wheel|Page 5141 > < Steering Mounted Controls Transmitter|Service and Repair|Page 5132
Page 1
background image

Steering Shaft: Customer Interest
Steering - Knock/Pop Noise When Turning Steering Wheel

T-SB-0296-08

September 16, 2008

Steering Intermediate Shaft Noise

Service Category
Steering

Section
Steering Gear/Linkage

Market
USA

Applicability

TSB SUPERSESSION NOTICE

The information contained in this TSB supersedes TSB No. ST001-06.

^

Applicability has been updated to include 2005 - 2006 model year Avalon and 2006 model year Highlander HV.

^

Production Change information has been removed.

^

The Introduction, Warranty Information, Parts Information, and Repair Procedure sections have been updated to reflect removal, lubrication, and
reinstallation of the steering intermediate shaft instead of replacement.

TSB No. ST001-06 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before
proceeding.

Introduction

Some customers may hear a clunk pop or knock type noise when turning the steering wheel left or right. Use the following procedure to lubricate the
intermediate shaft and address customer concerns.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,

Steering - Knock/Pop Noise When Turning Steering Wheel|Page 5141 > < Steering Mounted Controls Transmitter|Service and Repair|Page 5132