Highlander 2WD V6-3.3L (3MZ-FE) (2004)
f.
Remove the 2 nuts.
g. Remove the 3 bolts.
h. Pull out the control cable from the body.
8. INSTALL TRANSMISSION CONTROL CABLE ASSY
a. Pull in the control cable to the body.
b. Install the 3 bolts.
Torque: 4.9 Nm (50 kgf-cm, 43 inch lbs.)
c. Install the cable end, as shown in the illustration.
HINT: Install it with the uneven surface facing up.