Highlander 2WD V6-3.3L (3MZ-FE) (2004)
/Page-799010.png)
a. Install the wire harness of the transmission control switch as shown in the illustration.
b. Install the shift lever knob to the shift lever with 2 screws.
c. Install the shift lever knob cover to shift lever knob.
d. Install the 2 wire harnesses of the transmission control switch.
e. Install the indicator lamp wire harness and connector as shown in the illustration.
37. INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy to the vehicle with the 4 nuts.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B. C and D.
b. Connect the 3 connectors.
