toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Engine/Transmission Controls - Resetting ECM Memory|Page 3778
Page 2
background image

^

If there are 2 alignment pins present the transmissionltransaxle assembly may be installed following the applicable Repair Manual procedure.

NOTE:

A missing alignment pin may result in failure of the transmissionltransaxle assembly.

2.

Install the missing alignment pin(s).

^

Refer to the applicable Repair Manual procedure for location of the cylinder block rear side alignment pins.

NOTE

In the Repair Manual, the alignment pin is referred to as a "straight pin."

Drive Axles, Bearings and Joints > < Engine/Transmission Controls - Resetting ECM Memory|Page 3778