Highlander 2WD V6-3.3L (3MZ-FE) (2004)
Windshield: Service and Repair
REPLACEMENT
HINT: Installation is in the reverse order of removal. But, the installation is indicated only when it has a point.
1. REMOVE FRONT PILLAR GARNISH LH
2. REMOVE FRONT PILLAR GARNISH RH
3. REMOVE LH VISOR ASSEMBLY
4. REMOVE RH VISOR ASSEMBLY
5. REMOVE VISOR HOLDER
6. REMOVE COURTESY LENS
7. REMOVE ROOF CONSOLE BOX ASSEMBLY (W/O SLIDING ROOF)
8. REMOVE ROOF CONSOLE L/RELAY BOX ASSEMBLY (W/ SLIDING ROOF)
9. REMOVE ASSIST GRIP SUB-ASSEMBLY
10. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
11. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
12. REMOVE ROOF HEADLINING ASSEMBLY
a. Remove the roof headlining assembly within the range that the window shield glass can be removed.
13. REMOVE FR WIPER ARM RH
14. REMOVE FR WIPER ARM LH
15. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
16. REMOVE WINDSHIELD MOULDING OUTSIDE LH
a. Put protective tape.
b. Using a screwdriver, removed the clip.
c. Using a screwdriver, removed the hooks and windshield moulding outside LH.
17. REMOVE WINDSHIELD MOULDING OUTSIDE RH