Highlander 2WD V6-3.3L (3MZ-FE) (2004)
b. Push a piano wire through between the body and glass from the interior.
c. Tie both wire ends to wooden blocks or similar objects.
HINT: Apply protective tape to the outer surface to keep the surface from being scratched.
NOTE:
-
When separating the glass, take care not to damage the paint and interior exterior ornaments as shown in the illustration.
-
To prevent scratching the safety pad when removing the windshield, place a plastic sheet between the piano wire and safety pad.
d. Cut the adhesive by pulling the piano wire around it.
e. Remove the glass.
NOTE: Leave as much adhesive on the body as possible when cutting off the glass.
22. CLEAN WINDSHIELD GLASS
a. Using a scraper, remove the damaged stoppers, dam and adhesive sticking to the glass.
b. Clean the glass with cleaner.
NOTE:
-
Do not touch the glass after cleaning it.
-
Be careful not to damage the body.