Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
4. REMOVE DECK BOARD SUB-ASSEMBLY NO.3
5. REMOVE DECK BOARD SUB-ASSEMBLY NO.2
6. REMOVE DECK FLOOR BOX REAR
(a) Using a clip remover, remove the 2 clips and deck floor box rear.
7. REMOVE REAR FLOOR FINISH PLATE
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 6 clips, and remove the rear floor finish plate.
8. REMOVE BACK DOOR WEATHERSTRIP
9. REMOVE REAR SEAT RECLINING COVER NO.2 LH
(a) Using a clip remover, remove the clip.
(b) Disengage the 2 claws, and remove the rear seat reclining cover No.2.
10. REMOVE REAR SEAT RECLINING COVER NO.2 RH
11. REMOVE JACK CARRIER ASSEMBLY
(a) Remove the jack carrier support, jack assembly and jack carrier assembly.