Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
(a) Using a screwdriver, disengage 4 claws and remove the seat belt anchor cover cap.
HINT: Tape the screwdriver tip before use.
(b) Remove the bolt and separate the front seat outer belt assembly.
39. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH
40. REMOVE CENTER PILLAR GARNISH LH
(a) Remove the 2 screws.
(b) Disengage the clip and remove the center pillar garnish by pulling it down.
41. REMOVE CENTER PILLAR GARNISH RH
42. REMOVE DECK SIDE TRIM COVER LH
(a) Remove the deck side trim cover front and bolt.
(b) Disengage the 4 claws and remove the deck side trim cover.
43. REMOVE DECK SIDE TRIM COVER RH