Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
39. REMOVE ROPE HOOK
(a) Remove the 2 bolts and 2 rope hooks.
HINT: Use the same procedure to remove the other side.
40. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Using a clip remover, remove the 2 clips.
(b) Remove the rear combination light service cover.
(c) Remove the 4 deck side trim covers and 5 bolts.
(d) Disengage the 5 clips and remove the deck trim side panel assembly.
41. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
42. REMOVE QUARTER PILLAR GARNISH LH
(a) Using a clip remover, disengage the clip
(a) .
(b) Disengage the 2 clips (B, C) and remove the quarter pillar garnish.
(c) Disengage the 4 claws (D) and separate the rear No.1 seat belt assembly outer.
43. REMOVE QUARTER PILLAR GARNISH RH
44. REMOVE ROOF SIDE RAIL GARNISH SUBASSEMBLY LH