Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
4. Apply new adhesive tape to the rear spoiler as shown in the illustration.
e. Using a heat light, heat the body and rear spoiler.
NOTE: Do not heat the body and rear spoiler excessively.
f.
Release the release paper from the surface of the rear spoiler.
NOTE:
-
When the rear spoiler release paper is removed, take care that no dirt or dust get onto the uncoated area.
-
Do not apply excessive force onto the rear spoiler but apply steady pressure with your thumbs.
g. Install the rear spoiler with the 2 bolts and nut.