Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1553002.png)
PARTS INFORMATION
REQUIRED TOOLS & MATERIAL
REPAIR PROCEDURE
1. Remove the scuff plate.
2. Remove the old front door opening weatherstrip.
3. Thoroughly remove, with adhesive cleaners, any remnants of mastic sealer that present on the door frame opening.
4. Install the NEW weatherstrip by following the sequence of steps (driver's side shown in illustration). Make sure the weatherstrip is fully seated onto
the body.
5. Replace the scuff plate.
6. Follow the same sequence of steps on the passenger's side of the vehicle if necessary.
