Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-429002.png)
1. INSTALL VVT SENSOR (for Bank 1)
a. Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 1).
b. Install the VVT sensor (Bank 1) with the bolt.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
c. Connect the VVT sensor (Bank 1) connector.
2. INSTALL VVT SENSOR (for Bank 2)
a. Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 2).
b. Install the VVT sensor (Bank 2) with the bolt.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
c. Connect the VVT sensor (Bank 2) connector.
d. Install the heated oxygen sensor connector (Bank 2) to the wire harness bracket.
3. INSTALL AIR CLEANER CAP W/ INLET
