Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-508010.png)
a. Install the battery cover lock striker then push the button to lock.
b. Install the battery cover with the 28 bolts and 6 nuts.
NOTE: Use a ground bolt for position B.
Torque:
Bolt A 25 N.m (255 kgf.cm, 19 ft.lbf)
Bolt B 25 N.m (255 kgf.cm, 19 ft.lbf)
Bolt C 7.5 N.m (76 kgf.cm, 66 in.lbf)
Nut 7.5 N.m (76 kgf.cm, 66 in.lbf)
c. Connect the No.3 wire frame with the bolt.
Torque: 8.0 N.m (82 kgf.cm, 72 in.lbf)
12. INSTALL HV BATTERY SERVICE HOLE COVER
