Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-520003.png)
-
Insulate the tool with insulating tape.
-
Do not use the universal joint.
5. Remove the HV battery LH.
59. REMOVE ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY
NOTE:
-
Wear insulating gloves and protective glasses.
-
Insulate the removed terminals with insulating tape.
a. Disconnect the 2 connectors and clamps.
b. Remove the 2 bolts, nut, and EV battery plug.
INSTALLATION
1. INSTALL ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY
NOTE: Wear insulating gloves and protective glasses.
