Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-523004.png)
b. Remove the bolt and lift the lever to disconnect the No.3 wire frame from the w/ converter inverter assembly.
69. INSTALL INVERTER COVER
70. DISCONNECT REAR TRACTION W/ TRANSAXLE MOTOR ASSEMBLY
CAUTION: Wear insulating gloves.
NOTE: Insulate the removed terminals with insulating tape.
a. Disconnect the 2 connectors and clamp from the rear traction w/ transaxle motor assembly.
b. Remove the 2 nuts, and disconnect the No.3 wire frame from the rear traction w/ transaxle motor assembly.
