Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
1. Install the No.3 wire frame with the 6 nuts. (F)
Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf)
2. Pass the No.3 wire frame into the cabin and install the 2 nuts and bolt shown in the illustration. (E)
Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf)
3. Connect the clamp as shown in the illustration. (D)