Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
a. Connect the high voltage cable of the Generator with the 5 bolts to the w/ converter inverter assembly.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the high voltage cable of the Motor with the 5 bolts to the w/ converter inverter assembly.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
8. CONNECT ENGINE WIRE NO.4
CAUTION: Wear insulating gloves.
NOTE:
-
Make sure that the inverter converter is temporarily installed before working on the converter inverter assembly.
-
Do not allow any foreign objects or waterdrops to enter the w/ converter inverter assembly.
a. Connect the engine wire No.4 with the connector, clamp and grommet to the w/ converter inverter assembly.