Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-553002.png)
a. Disconnect the No.3 wire frame connector from the HV relay assembly.
b. Remove the 2 nuts, then disconnect the No.3 wire frame from the HV relay assembly.
c. Disconnect the 2 main battery cable connectors from the HV relay assembly.
d. Disconnect the 2 connectors from the HV relay assembly.
e. Remove the 3 nuts and HV relay assembly.
INSTALLATION
1. INSTALL HYBRID VEHICLE RELAY ASSEMBLY
NOTE: Wear insulating gloves and protective glasses.
