Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
License Plate Lamp: Service and Repair
Removal and Installation
REMOVAL
1. REMOVE ASSIST STRAP HOLE COVER
2. REMOVE ASSIST STRAP ASSEMBLY
3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY
4. REMOVE BACK DOOR HANDLE ASSEMBLY OUTSIDE
5. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
6. REMOVE LICENSE PLATE LIGHT ASSEMBLY
a. Remove the 4 screws and remove the license plate light assembly.
INSTALLATION
1. INSTALL LICENSE PLATE LIGHT ASSEMBLY
a. Install the license plate light assembly with the 4 screws.
2. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
3. INSTALL BACK DOOR HANDLE ASSEMBLY OUTSIDE
4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY
5. INSTALL ASSIST STRAP ASSEMBLY
6. INSTALL ASSIST STRAP HOLE COVER