toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 3022 > < Reading and Clearing Diagnostic Trouble Codes|Page 3020
Page 5
background image

a. CAN Communication systems (ECUS & SENSORS)

3. DTC TABLE BY ECU

HINT:
-

In the CAN communication system, CAN communication system DTCs can be displayed by the ECU using the intelligent tester.

-

If CAN communication system DTCs are output, trouble cannot be determined only by the DTCs. Perform troubleshooting according to
"HOW TO PROCEED WITH TROUBLESHOOTING".  See: CAN Communication System/Diagnostic Strategies

 

a. HV control ECU (HV) 

HINT:
-

DTC communication uses the CAN communication system.

-

Check for INFORMATION.

-

DTCs U0110-159, U0110-160, U0100-656, and U0110-657 are not the DTCs for the CAN communication system. Therefore, refer to the
troubleshooting procedures for the hybrid control system.

b. HV control ECU (ENGINE)

c. Skid control ECU

HINT: DTC communication uses the SIL line.

Reading and Clearing Diagnostic Trouble Codes|Page 3022 > < Reading and Clearing Diagnostic Trouble Codes|Page 3020