Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-585001.png)
Accelerator Pedal Position Sensor: Service and Repair
REMOVAL
1.REMOVE ACCELERATOR PEDAL ROD ASSEMBLY
a. Disconnect the connector from the accelerator pedal rod assembly.
b. Remove the 2 nuts and accelerator pedal rod assembly.
INSTALLATION
1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
a. Install the accelerator pedal rod assembly with the 2 nuts.
Torque: 4.9 N.m (50 kgf.cm, 43 in.lbf)
b. Connect the connector to the accelerator pedal rod assembly.
