Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
Transmission Position Switch/Sensor: Adjustments
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH
a. Loosen the 2 bolts of park/neutral position switch and set the shift lever to the N position.
b. Align the protruding part and neutral basic line.
NOTICE: There is play on the nut stopper side (protruding part). Align the center point of the range of the play with the neutral basic line.
c. Tighten the 2 bolts in the order shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 10 ft. lbs.)
2. INSPECT PARK/NEUTRAL POSITION SWITCH