toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Controls - ISC Learn procedure|Page 2753 > < Engine Controls - ISC Learn procedure|Page 2751
Page 3
background image

8.

Check that the air conditioner is OFF. Lightly depress the accelerator pedal and release it when the engine starts.

9.

Check that "COMPLETE" is displayed on the Diagnostic Tester screen.

HINT:

^

If "ISC LEARNING" is NOT completed within 1 minute, repeat steps 5 - 8.

^

The engine will usually stop when the "ISC LEARNING" is completed. However, the engine will NOT stop even when the "ISC
LEARNING" is completed in such cases where the charge level of the auxiliary battery is decreased.

Engine Controls - ISC Learn procedure|Page 2753 > < Engine Controls - ISC Learn procedure|Page 2751