Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
8. REMOVE FRONT SUSPENSION BRACE SUB-ASSEMBLY UPPER CENTER
9. REMOVE AIR CLEANER CAP W/INLET
10. REMOVE AIR CLEANER CASE W/RESONATOR
11. REMOVE EMISSION CONTROL VALVE SET
12. REMOVE INTAKE AIR SURGE TANK
13. DISCONNECT RADIATOR HOSE INLET
14. REMOVE IGNITION COIL ASSEMBLY
15. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
a) Remove the 2 engine wire harness clamps.
b) Remove the 3 nuts and disconnect the engine wire harness.
c) Remove the 9 bolts and the cylinder head cover.
16. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY LH
a) Using an E6 "torx" socket wrench, remove the 2 bolts and disconnect the engine wire harness protector.
b) Remove the 2 engine wire harness clamps.
CAUTION: Wear insulating gloves.