Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
Braking Sensor/Switch: Testing and Inspection
INSPECTION
1. INSPECT BRAKE PEDAL STROKE SENSOR
a. Inspect the brake pedal stroke sensor. If any of the following occurs, replace with a new brake pedal stroke sensor:
-
The surface of the brake pedal stroke sensor is cracked, dented, or chipped off.
-
The connector or wire harness is scratched, cracked, or damaged.
-
The brake pedal stroke sensor has been dropped.
b. Measure the resistance according to the value(s) in the table.