Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
Wheel Speed Sensor: Testing and Inspection
Skid Control Sensor (For 2WD)
INSPECTION
1. INSPECT SKID CONTROL SENSOR
a. Inspect the skid control sensor. If any of the following occurs, replace with a new skid control sensor:
-
The surface of the skid control sensor is cracked, dented, or chipped off.
-
The connector is scratched, cracked, or damaged.
-
The skid control sensor has been dropped.
b. Measure the resistance according to the value(s) in the table.
c. Measure the resistance according to the value(s) in the table.