Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
Blower Motor Switch: Service and Repair
REMOVAL
1. REMOVE DECK SIDE TRIM COVER FRONT
a. Using a thin flat-head screwdriver with the tip taped up with protective tape, disengage the 2 claw fittings and remove the deck side trim cover
front.
2. REMOVE DECK SIDE TRIM COVER RH
a. Remove the bolt.
b. Release the 2 clip fittings and 2 claw fittings.
c. Remove the connector and deck side trim cover RH.
3. REMOVE REAR HEATER BLOWER SWITCH
a. Remove the 2 screws and rear heater blower switch.
INSTALLATION
1. INSTALL REAR HEATER BLOWER SWITCH
2. INSTALL DECK SIDE TRIM COVER RH
3. INSTALL DECK SIDE TRIM COVER FRONT