Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
2. Connect the EV battery plug on the HV battery with a new nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
NOTE:
-
Be sure to engage the plastic cover securely.
-
Insulate the tool with insulating tape.
-
Do not use the universal joint.
3. Connect the main battery cable on the HV battery with a new nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
NOTE:
-
Be sure to engage the plastic cover securely.
-
Insulate the tool with insulating tape.
-
Do not use the universal joint.
4. Connect the wire harness clamp of the battery thermo sensor.