Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
e. Disconnect the ventilation hose.
f.
Remove the 2 bolts, then remove the engine hanger No.1 (A).
g. Remove the 2 bolts, then remove the surge tank stay No. 1 (B).
h. Remove the 2 bolts, then remove the surge tank stay No. 2 (C).
i.
Disconnect the ground cable connector.
j.
Using a socket hexagon wrench 8 mm, remove the 4 bolts.
k. Remove the 2 nuts, then remove the emission control valve bracket and the intake air surge tank.
l.
Remove the gasket from the intake air surge tank.
14. DISCONNECT FUEL PIPE SUB-ASSEMBLY